Skip to main content

DCV Payback Calculator

A planning-level estimate of the payback on an AntrumX demand-controlled ventilation system for a 100% outside-air lab, vivarium, or cleanroom space. Fill in the fields below for a quick estimate, or open Advanced Inputs for site-specific detail.
Not sure what ACH your space needs? Start with the LVDL selector first.

Facility Basics

Enter the monitored square footage.
Enter the current baseline air change rate.
Unusual for a 100% OA space; most run 4–25 ACH. Double check your BAS setpoint or design basis.
Enter a blended electric rate.
Outside the typical U.S. commercial range (roughly $0.06–$0.30/kWh); double check against a recent utility bill.
Enter the quoted or estimated installed cost.

Mechanical Plant & Recovery

Space & Load Detail

Project Economics

Enter the annual calibration expense.
Critical-environment sensors require calibration every 6 months; confirm this against your quoted service contract.

Estimated Payback

Quick Estimate
Turndown ScenarioScenario ACHReductionGross Annual $ SavedSimple Payback
How this is calculated

This is a planning-level, screening estimate. For a validated number backed by your site's actual utility rates, mechanical documentation, and turndown targets, request a full analysis from Antrum.

Request Full Analysis